Rapid TAC II Decal Application Fluid - 4oz Spray Bottle

Rapid Tac II
Application Fluid

For fast, easy, quality applications with no bubbles or wrinkles, even in cold weather.

Change is good. Back in the day choosing a vinyl film was easy with basicly two film types, cast, and calandared. Nowdays things are a little different. Sign and graphics professionals now hove more types of vinyl films to choose from than ever, with more adhesive types as well. We developed Rapid Tac II to work with a wider variety of films such as the economy calandared, intermediate calandared, high performance calandared, metallic, reflective, polyester, mylar and other specialty films). Rapid Tac II promotes bonding faster than the original Rapid Tac application fluid and is ideal for cold weather and glass application.
Rapid Tac II is not a replacement for the Original Rapid Tac, and may bond too fast with “Premium Cast” films in warmer conditions.
STEP 1. Clean surface thoroughly with Rapid Tac II and a kitchen paper towel. DO NOT USE OTHER CLEANERS OR SOLVENTS.
(We do recommend Rapid Prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants)

STEP 2. Spray surface again with Rapid Tac II, peel backing off decal and place on wet surface.

STEP 3. Position decal. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions.

STEP 4. Wait 2-3 minutes. Saturate paper cover tape, if any, with Rapid Tac II, then remove paper tape. Wipe surface with paper towel.

Click here to learn more about the Original Rapid Tac.
 

Detailed Use Instructions