Basic HTML Version
A-20738
Flipper Assembly - Left
Item Part Number
Description
Item Part Number
Descri ption
1
04-10355-2
Flipper Base Assembly, Left
18 A-15848-L
Crank Link Assembly, Left
2
SW-1 A-194
Switch Assembly
a) A-17050-L
Flipper Crank Assembly, Left
3 4701-00002-00
Lockwasher #6 Split
b) A-15847
Flipper Link Assembly
4 4105-01019-10
Sh. Metal Screw, #5 x 5/8"
c)
02-4676
Link Spacer Bushing
5
4008-01079-05
Mach. Screw, 8-32 x 5/16"
d) 4010-01086-14
Cap Screw, 10-32 x
7/8"
6 4701-00003-00
Lockwasher #8 Split
e) 4700-00023-00
Flat Washer,
5/8
x 13/64 x 16ga.
7 01-9375-1
Switch Mounting Bracket
f)
4701-00004-00
Lockwasher #10 Split
8
20-6516
Speednut, Tinnerman
g) 4410-01132-00
Nut 10-32 ESN
9 401 0-01 066-06 Cap Screw, 10-32 x
3/8"
19 23-6577
Bumper Plug,
5/8"
10 4701-00004-00
Lockwasher #10 Split
20 03-7568
Flipper Bushing
11 A-12390
Flipper Stop Assembly
12 FL-11630
Flipper Coil, Red
a)
03-7066-5
Coil Tubing
Associated Parts:
13 01-7695-1
Solenoid Bracket
14 4006-01017-04
Mach. Screw, 6-32 x
1/4"
(Not Shown)
15 10-364
Spring
21 23-6695
Flipper Rubber Ring, Black
16 4006-01005-06
Mach. Screw, 6-32 x
3/8"
22 20-10110-6
Flipper Bat wiSh aft
17 4406-01117 -00 Nut 6-32 Hex.
Flipper Notes .. _
t. Each Flipper Assembly
is
mounted beneath the playfiefd. in conjunction with the Ptest«: Flipper
&
Shaft. and Flipper Rubber on the upper stoe of the playfielti.
2. With the flipper. in the non-activated position. the E.
O. S.
Switch contacts must have
a
gap of. 062
(i.
0
15)
inch. When flipper
is
activated switch must close.
3. Any adjustment of the E.o.
S.
switch must be made at
a
minimum distance of 0.25 inch fram the switch body.
4. Longer blade of E. o.S. switch must be made straight. Gap adjustment
is
done by adjusting shorter blade.
5. All moving elements of the assembly must operate freely without any evidence of binding.
6. Apply Loctite ™
245
when reattaching screws to the Flipper Stop Assembly. the Solenoid Bracket. and the Flipper Bushing.
2-13