Basic HTML Version
ERROR MESSAGES
The WPC-95 game program has the capability to aid the operator and service personnel. At game turn-
on, or after pressing the Begin Test switch, once the game has been operating for an extended period,
the display may signal with a message, "Press ENTER for Test Report".
This indicates the game
program has detected a possible problem with the game.
CIRQUS VOLTAIRE is the first game
to
feature the new coin door display. When the coin door is
open (in Attract mode and game play), the display shows that the high-power has been disabled. It
also shows the Test Report (if there is anything to report). and some game specific information.
Use the flipper buttons
to
page through this information.
To obtain details of the problem open the coin door and press the Begin Test switch, Press the Enter
button to begin displaying the message{s). The following messages apply to your game.
If the Ringmaster has been disabled by the Adjustment, the test report shows:
"RINGMASTER OFF"
"BY ADJUSTMENT"
If the Ringmaster has detected that any of the three positions switches is bad, the test report shows one
or more of:
"CHECK SWITCH 42"
"CHECK SWITCH 43"
"CHECK SWITCH 44"
"RINGMASTER UP"
"RINGMASTER MID."
"RINGMASTER DOWN"
A Ringmaster test (T.18) is provided, use it to check the device.
If the Ringmaster has detected that the Motor Drive does not work, the test report shows:
"RINGMASTER ERROR"
"NO MOTION"
A Ringmaster test (T.18) is provided, use it to check the device.
If the Ringmaster has detected that the Direction Drive does not work, the test report shows:
"RINGMASTER ERROR"
"NO REV. MOTION"
(No reverse motion)
A Ringmaster test (T .18) is provided, use it to check the device.
If the Diverter has been disabled by the adjustment, the test report shows:
"DIVERTER OFF"
"BY ADJ A.2 31"
If the Diverter has detected that it is stuck Open or Closed, the test report shows one of:
"DIVERTER ERROR"
"DIVERTER ERROR"
"STUCK OPEN"
"STUCK CLOSED"
A Diverter test (T .17) is provided, use it to check the device.
If the Backbox has been disabled by the Adjustment, the test report shows:
"BACKBOX DISABLED"
"BY ADJ A.2 29"
1-50