• July 16, 2024, 03:54:41 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Ball trough having trouble launching ball into shooter lane  (Read 10429 times)

Offline Tims3484

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Ball trough having trouble launching ball into shooter lane
« on: October 06, 2015, 01:13:12 AM »
every so often my game (#347) has a hard time launching the ball from the trough into the shooter lane. Sometimes 6 or 7 tries. Anyone had this issue? Is there a fix?

Offline Pablito

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 57
  • Karma: +2/-0
    • View Profile
Re: Ball trough having trouble launching ball into shooter lane
« Reply #1 on: October 06, 2015, 11:25:54 AM »
Post # 160 here.


You are not allowed to view links. Register or Login

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Ball trough having trouble launching ball into shooter lane
« Reply #2 on: October 06, 2015, 01:43:17 PM »
First, please go into the CGC adjustments and try lowering the coil strength, or raising it. To get into the CGC stuff, hold the escape button down 5 seconds or so and the game will go into them.

If that doesn't do it, the metal flap on the ball trough that diverts the ball to the shooter lane may need to be bent out a little.

This will help -  You are not allowed to view links. Register or Login

While for the WOZ pinball, same basic ball trough, same basic issue if the ball hits the flap and goes back down.

LTG : )

Offline Tims3484

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Ball trough having trouble launching ball into shooter lane
« Reply #3 on: October 17, 2015, 10:57:33 AM »
I will check it out. Thanks!