• April 28, 2024, 02:00:23 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Switch error  (Read 8543 times)

Offline shiffdog

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Switch error
« on: August 11, 2016, 11:18:22 PM »
Just got my MMr today. The only significant issue I've run into so far is that my right inlane is not registering; in test mode I get the error shown in the photo. What's the fix for this? Thanks.

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Switch error
« Reply #1 on: August 12, 2016, 12:32:40 AM »
Looks like it is stuck closed.

Please go into Tests - Switch Edge - and push the switch arm up and down and see if the switch works. Up should be open and when your finger or a ball presses it, it should be closed.

LTG : )

Offline shiffdog

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Re: Switch error
« Reply #2 on: August 12, 2016, 03:03:26 PM »
Lloyd - the switch does not respond when tested. Looking underneath I do not see any obviously loose connections.

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Switch error
« Reply #3 on: August 12, 2016, 03:08:15 PM »
If the connector reaches try it in a different spot to see if it's switch or board.

If it's the switch please go to Support on Chicago-Gaming.com and open a ticket to get a new switch.

LTG : )

Offline shiffdog

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Re: Switch error
« Reply #4 on: August 19, 2016, 02:07:56 PM »

The switch appears to be faulty. Opened ticket #793 on CGC's support portal. Thanks