Basic HTML Version
T.tS
Trap Door Test
Once the test name is shown under the Test Menu, press the Enter button. This test has three modes
of operation. The last character of the top display shows an 'X' when the door is closed.
Repeat -
The repeat test pulses a single coil. either the up or down coil, until the Up or Down
button is pressed to move to the next coil.
Stop
Press the Enter button during the Repeat test and the Trap Door stops activating.
Run
Press the Enter button during the Stop test and the Trap Door cycles Up and Down
automatically.
Either press the Enter button to return to the Repeat test mode,
OT
press the Escape button to retum to
the Test Menu. Then, press the Escape button again to return to the Main Menu. Once in the Main
Menu press the Up button to advance to the next menu selection, the Utilities Menu.
Press the Enter button to activate the Utilities Menu, then use the Up or Down button to cycle through
the Utilities Menu selections. Press the Enter button to activate the desired individual Utility or
Utilities Group when it appears in the displays. If you change a utility setting and realize you have
made a mistake, press the Escape button while "Saving New Value" is still in the displays. The
original setting is retained and the new setting is ignored.
FUNBOUSE 1·34
•
•
•