Basic HTML Version
C-13174-R
C-13174-L
Flipper Assembly (Right)
Flipper Assembly (Left)
Item Part Number
Description
Flipper Assembly Notes ...
1.
B-13104-R
Flipper Base Assy, Right
1. Each Flipper Assembly on the Lower Playfield in
*
B-13104-L
Flipper Base Assy, Left
mounted beneath the playfield, in conjunction with
2.
03-7811
End of Stroke (EOS) Sw.
the plastic Flipper Paddle and Shaft (20-9592-~)
3.
RM-21-06
Sleeve, Vinyl (Cap. leads)
and Flipper Rubber (23-6519-6) on the upper side
4.
5045-12098-00
Capacitor, 2.2 IlFd, 250V, 20%
of the playfield.
5.
4701-00002-00
Lockwasher, #6 Split
2. The tip of the EOS Switch must travel
6.
4105-01019-10
Sh. Metal Screw,#5 x
5/8
0.150
(+
.010, - .000) inch, before the contacts fully
7.
23-6622
Tape, Double-sided
open, with the flipper in the actuated position.
8.
4008-01079-05
Cap Screw, 8-32 x
5/16
The EOS Switch contacts must have a gap of
9.
4701-00003-00
Lockwasher, #8 Split
0.062 (± .015) inch. Adjustment of the EOS Switch
10.
01-9375
Switch Mounting Bracket
must be made at a minimum distance of 0.25 inch
11.
03-7520-2
Ty-Wrap, Nylon
from the switch body.
12.
20-6516
Speednut, Tinnerman
3.
All moving elements of the assembly must operate
13.
4010-01066-06
Cap Screw, 10-32 x
3/8,
SH
freely, with no evidence of binding.
14.
4701-00004-00
Lockwasher, #10 Split
4. The large end of the Coil Plunger Spring (item 20)
15.
A-12111
Flipper Stop Assembly
must fit within the four lugs of the Solenoid Bracket.
16.
HW-30018-6
Wire, 18 AWG, Blue
5. For coil replacement, remove the Solenoid Bracket
17.
FL-11630
Flipper Coil (Red)
(Item 18) to prevent screw damage.
1S.
01-7695
Solenoid Bracket
6. Use Loctite™ 242 when reattaching screws to the
19.
4006-01017-04
Mach. Screw, 6-32 x
1/4
Flipper Stop Assembly, the Solenoid Bracket, and
20.
10-376
Coil Plunger Spring
the Flipper Bushing.
21.
B-10655-R
Crank Link Assembly, Right
7. When replacing their Bumper Plug (item 22) to
*
B-10655-L
Crank Link Assembly, Left
restore proper flipper operation, readjust the flipper
a) 02-4179
Link Spacer Bushing
paddle and shaft position.
b) 4010-010S6-14
Cap Screw, 10-32 x
7/S,
SH
S. Solid-color blue wire connects to the banded end
c)
4700-00023-00
Flatwasher,
5/S
x
13/64
x 16ga.
of each diode, mounted on the connector end of the
d) 4701-00004-00
Lockwasher, #10 Split
Flipper Coil (item 17). Trace-color wire connects to
e) 4410-01132-00
Nut, 10-32 ESNA
the unbanded end of the diode.
f)
A-10656
Flipper Link Assembly
1.) 02-4219
Coil Plunger
2.) 20-9370-1
Spring Pin,
5/32
dia. x
7/16
3.) 03-S050-1
Flipper Link
g)
B-10657-R
Flipper Crank Assy, R.
*
B-10657-L
Flipper Crank Assembly
1.) 01-S073-R
Flipper Crank, Right
*
01-S073-L
Flipper Crank, Left
2.) 17-1037
Crank Washer
3.) 4010-01066-20
Cap Screw,1 0-32 x
1-1/4
4.) 4410-01127-00
Nut, 10-32 Hex Head
5.) 4700-00107-00
Flatwasher,
5/S
x
13/64
x 12ga.
6.) 4701-00004-00
Lockwasher, #10 Split
7.) RM-23-06
Tubing, H. S.
1/4
DWP
22.
23-6577
Bumper Plug
23.
03-7568
Flipper Bushing
24.
4006-01005-06
Mach. Screw, 6-32 x
3/S
25.
4406-01117 -00 Nut, 6-32 Hex.
Note:
*
=
Items for Left Flipper Assembly Only.
PARTY ZONE
2.16