Basic HTML Version
T.6 General Illumination
.,
Once the test name is shown under the Test Menu, press the Enter button. This test allows you
to check all of the General Illumination circuits. There are two modes of operation, Stop and Run.
To obtain wire color, driver number, connector, and fuse information, press the Start button when
the desired General Illumination circuit appears in the displays.
Stop
Press the Up or Down buttons to cycle through the General Illumination Test
manually. All illumination is tested first, followed by an individual circuit test. The
circuit name and number shows in the displays while the corresponding lamps
lights. If any other results occur the system has detected an error.
Run
Press the Enter button any time during Stop test mode and the General
Illumination Test cycles through automatically. For each circuit shown in the
displays the corresponding bulbs should light. If any other results occurs the
system has detected a problem.
Either press the Enter button to return to Stop test mode, or the Escape button to return to the
Test Menu. Once in the Test Menu press the Up button to advance to the next test, (or the Down
button to return to a previous test). Press the Enter button to activate that test.
T.7 Sound and Music Test
Once the test name is shown under the Test Menu, press the Enter button. The Sound and
Music Test allows you to check the audio circuits. This test has three modes for testing the sound
and music circuits, Running, Repeat and Stop.
Running
-
This test steps through a sequence of sounds and music. Pressing the Up or
Down button during this portion of the Sound and Music test allows you to
advance to a particular sound or tune without having to wait for the program to
play all the sounds available in the test. For each name and number that appears
in the displays a sound or tune should be heard. Any other results indicates the
system has detected a problem.
Repeat
Press the Enter button at any time during the Running test mode to cause the
program to stop and repeat a particular sound or tune. The same sound should
repeat continuously until the Up or Down button is pressed. Any other results
indicates the system has detected a problem.
Stop
Press the Enter button at any time during the Repeat test mode to stop this test
altogether. Nothing should be heard. Any other results indicates the system has
detected a problem.
Use the Enter button to return to the Running test mode, or the Escape button to return to the
Test Menu. Once in the Test Menu press the Up button to display the next test, (or the Down
button to return to a previous test). Press the Enter button to activate that test.
PARTY ZONE 1-32
••
'~,
r > .
I