Basic HTML Version
INSTRUCTIONS FOR At TERING COIN CHUTES
EQUIPPED WITH A FLIP-OVER DEVICE.
FOR 1 COIN-FOR 1 PLAY
FIGURE 1
OR
2
COINS - FOR
FIGURE 2
PLAY
1/
X
II
/I
A"
II
X"
"A"
"B"
o
o
_,._)
"
,-
;'
" "
/
1 COIN - FOR 1 PLAY (FIGURE 1):
e·
Wire form
"A"
should be in position as shown in Figure 1. Flip-over lever should
rebound from wire form
"A"
and return to position shown in Figure 1 every time a
coin is inserted. All coins pass over the coin trip switch wire
"8".
2 COINS - FOR 1 PLAY (FIGURE 2) :
Wire form
"A"
should be in position as shown in Figure 2 (see note). Flip-over
lever should alternate from side to side. 1st coin should go to cash box without ac-
tuating coin trip switch wire
"8
11
,
2nd coin should pass the coin trip switch wire "B"
and returns flip-over to position as shown in Figure 2.
NOTE:
To change from 1 coin play to 2 coin play or vice versa - loosen screw "X" and
move screw, bushing
&-
wire form
"A"
to position as required - shown in Figure 1
position as required - shown in Figure 1 or Figure 2.
When using 1 coin for 1 play, wire form
"A"
should not under any circumstances
be allowed to enter the "Banana" slot and cause binding of flip-over lever.
(I
2