Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: juggy on January 25, 2016, 06:08:22 PM

Title: Ball Trough constantly pumping out balls during gameplay
Post by: juggy on January 25, 2016, 06:08:22 PM

During the game on occasions the ball launch function constantly shoots out balls then stops after a random amount of time. Not sure if it is a software issue of something else.

Title: Re: Ball Trough constantly pumping out balls during gameplay
Post by: Lloyd Olson on January 25, 2016, 07:37:21 PM

Please be sure you have four balls in the game, not more or less. Power off - reseat the connectors to the ball trough opto boards. Then go into switch edge test and roll one ball at a time into the ball trough, see if all optos work and if the report on the screen, look for any flakiness.

LTG : )™

Title: Re: Ball Trough constantly pumping out balls during gameplay
Post by: juggy on January 25, 2016, 08:31:50 PM

Thanks, I did what you suggested. No errors all checks out good, maybe the re-seating of the connectors did the trick.  :) Played a couple of test games, seems to be working fine.

Title: Re: Ball Trough constantly pumping out balls during gameplay
Post by: kev on January 25, 2016, 11:45:26 PM

This has been happing to my game at random times, I did start a ticket with CGC. but no faults with it. Was playing it tonight and after about 5 games it happened again. MMR number 328. Please keep me posted if you figure it out. Thanks. I did check every connection and did a switch test still unable to catch it in the act.