Planetary Pinball Forum!
Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: Drewblood419 on March 14, 2016, 04:24:46 PM
-
Anyone tie in a 12v lightstrip above the back panel? I'm wondering how a blacklight led strip would look lighting up the Lightning when the flashers flash but not sure where to tie into I'd like for it to trigger with the back panel flasher but it is a board not a bulb and socket. Some of my concerns are: how will the board react to having another string of lads come after it? Will the main board sense an issue at the flasher board with more of a load on it?
-
Hi try using 6v led strip and wire ( solder ) it directly into any gi bulb there is a bloke here in oz on ebay that sells 6v stips try the purple also alibaba has them alot easier to work with than the 12v
-
Actually the 12V version worked perfectly I tied into a flasher so that the blue light strip flashed when the lighting effect is supposed to be triggered. Check it out :) 8)
http://youtu.be/m5f6VlHX6kM