Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: styxskum on July 13, 2016, 09:01:23 PM

Title: Castle Drawbridges Error message says "Down switch broken"
Post by: styxskum on July 13, 2016, 09:01:23 PM

My machine is giving me an error message that the up and down switches are broken.  when i go into the switch test mode and operate the manually nothing happens the do not close they stay in the open position. Both switches stay open. help

Title: Re: Castle Drawbridges Error message says "Down switch broken"
Post by: Lloyd Olson on July 13, 2016, 09:41:57 PM

Please check connector for the switches close to the drawbridge assembly that it is pushed together tight, and a wire or pin isn't sticking out. Then follow to the board the wires go to and be sure that connector is plugged on tight.

In Tests, you can also run a drawbridge test to check them.

LTG : )