• December 05, 2024, 02:29:46 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - epthegeek

Pages: [1]
1
MMR Support [MMR Members Only] / Re: MMR diffuser installed
« on: April 20, 2016, 03:35:46 PM »
Is the diffuser set being provided to those with thin-ink inserts free of charge? Or do you have to buy the thing?

2
MMR Support [MMR Members Only] / Re: Black MMR's Rick...?
« on: September 14, 2015, 05:00:53 PM »
Black playfields?  What's different?  Are the wireforms black too?  I just assumed the playfield in both would be identical and only the trim changed.

3
MMR Support [MMR Members Only] / Re: Slingshot Damage
« on: June 18, 2015, 09:09:02 AM »
Rick - Do you know if the fix going forward for new games being built going to be using the new plunger length? Or will the bracket position be adjusted for future games being produced?

4
MMR Support [MMR Members Only] / Re: Slingshot Damage
« on: June 02, 2015, 10:52:55 PM »
You are not allowed to view links. Register or Login
There are 3 screws holding it. So there is no give. Holes would likely have to be filled then new pilot holes be drilled since the new holes would be too close to the originals.  Then there is still the damaged Playfield after that.


It's currently hitting the wood, and will only move farther as the coil stop wears -- and you really think you'd move it so minimally that the holes would hit each other?

Pages: [1]