Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: PinDuo on July 16, 2016, 05:38:53 PM

Title: Troll Switch registering dot
Post by: PinDuo on July 16, 2016, 05:38:53 PM

Checked the switches and all worked OK. Simulated game  and all troll switches registered. In switch edge test #15 Troll target switch seems to show closed. Guess I'll have to take apart the troll and adjust that switch. Wasn't looking for this in the first week of ownership. Also I have the software upgrade but am reluctant to install after reading the brick comments. Thanks

Title: Re: Troll Switch registering dot
Post by: schonb25 on July 16, 2016, 08:30:57 PM

Do the update. If you get stuck, I will help you. Better chance of getting hit by lightning than having an issue!

Title: Re: Troll Switch registering dot
Post by: Lloyd Olson on July 16, 2016, 09:08:32 PM

You might be able to hold it up and adjust without taking it apart. The troll face is a leaf blade switch, just tweak the leaf blade behind it a little farther away.

LTG : )

Title: Re: Troll Switch registering dot
Post by: PinDuo on July 17, 2016, 10:26:17 AM

Thanks All,
Will do the software upgrade and adjust the switch

Title: Re: Troll Switch registering dot
Post by: PinDuo on July 17, 2016, 07:21:41 PM

Software update went smoothly. Thanks for the encouragement.
I was looking at the wrong switch and when I got it right Voila credit dot gone.
I found that the manual has some items numbered incorrectly.
 As always thanks Lloyd