Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: shiffdog on August 11, 2016, 11:18:22 PM

Title: Switch error
Post by: shiffdog on August 11, 2016, 11:18:22 PM

Just got my MMr today. The only significant issue I've run into so far is that my right inlane is not registering; in test mode I get the error shown in the photo. What's the fix for this? Thanks.

Title: Re: Switch error
Post by: Lloyd Olson on August 12, 2016, 12:32:40 AM

Looks like it is stuck closed.

Please go into Tests - Switch Edge - and push the switch arm up and down and see if the switch works. Up should be open and when your finger or a ball presses it, it should be closed.

LTG : )

Title: Re: Switch error
Post by: shiffdog on August 12, 2016, 03:03:26 PM

Lloyd - the switch does not respond when tested. Looking underneath I do not see any obviously loose connections.

Title: Re: Switch error
Post by: Lloyd Olson on August 12, 2016, 03:08:15 PM

If the connector reaches try it in a different spot to see if it's switch or board.

If it's the switch please go to Support on Chicago-Gaming.com and open a ticket to get a new switch.

LTG : )

Title: Re: Switch error
Post by: shiffdog on August 19, 2016, 02:07:56 PM

The switch appears to be faulty. Opened ticket #793 on CGC's support portal. Thanks