Messages

16

MMR Support [MMR Members Only] / Re: MMR insert text is thin and transparent

« on: February 11, 2016, 11:47:27 AM »

Is it necessary for everyone to put in a ticket for this or just wait to hear what CGC is going to do?

17

MMR Support [MMR Members Only] / Re: PPS- looking for update on CGC's response to the insert issues.

« on: February 09, 2016, 11:49:23 AM »

Swapping an unpopulated playfield is a s**t ton of work, and something I'm not comfortable doing.  For $8k, I don't think I should have to either.

18

MMR Support [MMR Members Only] / Re: PPS- looking for update on CGC's response to the insert issues.

« on: February 09, 2016, 08:59:25 AM »

I would expect a fully populated playfield swap.  I'm sure I'm not the only one that wouldn't be able to swap a full playfield of ramps/mechs etc...
They f'd up, do the right thing.  Time for customer service to shine if they expect to keep selling games in the future. 

19

MMR Support [MMR Members Only] / Re: Need software update for Catapult to eject two balls !!!!!!

« on: February 06, 2016, 12:04:40 PM »

I tried that but got too many bounce outs.  When two get stuck in there, I just shake the crap out of it until they come free.

20

MMR Support [MMR Members Only] / Re: MMR insert text is thin and transparent

« on: February 03, 2016, 11:14:03 AM »

Mine has the same issue.  #4xx

21

MMR Support [MMR Members Only] / Re: MMR suddenly not keep date/time

« on: January 13, 2016, 10:14:24 AM »

Sounds like a lot of people are having this issue.  Guess I'll have to set my t/d and see what happens.

22

MMR Support [MMR Members Only] / Re: Flipper power settings

« on: January 11, 2016, 04:13:26 PM »

I've upped my flipper power to +2.  Actually, during a family party with several hours of play, I upped them to +4 and they still seemed a bit weak.

23

MMR Support [MMR Members Only] / Re: MMR suddenly not keep date/time

« on: January 11, 2016, 04:11:31 PM »

I've done the software update.  I still get the occasional speaker crackle.  Shouldn't say still, as it never happened before I did the update.
I never set the date to begin with.  Is there a reason to be concerned about the date?  No biggie to me.?

24

MMR Support [MMR Members Only] / Re: Blue plastic tool?

« on: January 11, 2016, 08:52:06 AM »

I don't recall seeing that in my hardware bag. :-(

25

MMR Support [MMR Members Only] / Madness Champion

« on: November 24, 2015, 10:54:09 PM »

I noticed when entering intitials for Madness Champion that the M on madness doesn't fit on the screen. It is kind of cut off and lower than the rest of the text. Not sure if that is normal or not.

26

MMR Support [MMR Members Only] / Re: Ball hitting Left Popper from outer left lane

« on: November 02, 2015, 09:15:15 AM »

Same issue with mine.  Doesn't look like there is much adjustment to be done with the eject mech.  Has anyone figured out a fix?

27

MMR Support [MMR Members Only] / Re: Black MMR's Rick...?

« on: September 15, 2015, 09:32:36 AM »

Ah I guess I misunderstood.  Any chance you will sell wireforms that are powdercoated to match the trim?

I highly doubt.  I think these different trim options have already been enough of a hassle.