Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: Ding on February 16, 2020, 09:38:32 PM

Title: Left Troll Problem
Post by: Ding on February 16, 2020, 09:38:32 PM





My left troll isn't registering hits. I found two screws and a double holed washer on the playfield. The face of my left troll is totally loose. Just flapping around.


I found the attached picture that Lloyd had posted on another forum. Obviously I need to reattach these 2 screws and the washer to the back of the face of my left troll to hold it in place. However, what are the 2 screws attached to? It is attaching the face of the troll to the long arm of the switch? I just can't make that out from the picture. Is the washer under the screw heads but above the long arm of the switch?



Title: Re: Left Troll Problem
Post by: Lloyd Olson on February 17, 2020, 12:25:41 PM
Hello
There is a long metal blade going into the troll face with two threaded holes. So you have that long metal blade - troll face - then the screws. You slip the troll face over that blade so it is inside the troll face, then install the screws.
Thank you,Lloyd
Title: Re: Left Troll Problem
Post by: Ding on February 19, 2020, 10:25:47 AM
Thanks!