• December 05, 2024, 09:08:25 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PPS

Pages: 1 ... 30 31 [32] 33 34
466
PPS Parts (and Art) Wish List / Re: CC Mountain
« on: October 11, 2014, 06:14:44 PM »
There were plans, and I need to see where that is again. If I get any news I will update.
 
rick
 

467
PPS Parts (and Art) Wish List / Re: BBB parts
« on: October 07, 2014, 01:50:41 PM »
We have pallets of various BBB parts, and will be posting here as we have on pinside. We dig out various BBB parts and list them, usually small quantities.

468
PPS Parts (and Art) Wish List / Re: Restoration packages
« on: October 06, 2014, 06:10:59 PM »
Problem is that there are multiple vendors often, as well as different demand for the different items (i.e. plastics move faster than playfields), so it's a little tricky especially when vendors are different. We do try to get things lined up whenever it is possible, but it's like herding cats sometimes.

469
MMR Updates (READ ONLY) / MMR Update - 10/6/14
« on: October 06, 2014, 03:05:27 PM »
MMR Update call today - Stern (Doug Duba, Gary Stern, Ray Tanzer, Dave Peterson, Michael O'Donnel, Rick)
- Still Waiting for UL - any of the issues identified thus far have been either addressed or suitable workarounds (which do not require at this point any parts changes, but more things like adding insulation on top of wire for High Voltage, etc. We are waiting for 'ok' on tranformer and transformer supplier has all parts in stock to build transformers quickly.
- Reviewed project per Chart to insure timing on parts in and available at stern, factory floor setup ok, packaging definition, pre-build, etc.
- We will have 3-4 MMR's at Chicago Expo setup to Play (likely at PPS booth)
- Rick will be at Gary's talk if any MMR topic comes up there (Friday late afternoon?)
- Product support being solidified - help ticket system being deployed, PPS forum support area, Support resources trained, etc.
- Game will not be 'on the line' at Expo - as disappointing as that is, it won't be too far off, but the UL is gating and is running longer than we had hoped. Sterns Line is prepped, many parts are on the floor, fixtures are built, etc. We should have one or more of the several pre-production games that Stern has built on the floor at Stern at the time of the tour - details tbd.

470
All Things Pinball / Re: Welcome!
« on: October 04, 2014, 11:56:51 AM »
yes, you can ... welcome ... it will grow at it's own pace, but there will  be less noise as well as no disrespect here.
rick
 

471
MMR Support [MMR Members Only] / Re: non-glare glass availability
« on: October 03, 2014, 02:34:32 PM »
It will ship from California. We have some of it here now, more on order.

472
PPS Parts (and Art) Wish List / Re: HS Traffic Light Assembly
« on: September 30, 2014, 07:57:30 PM »
I've checked and they are on order, just check back on the site from week to week and should turn up sooner or later (probably 2-4 weeks).
 
rick

473
We are just about done with the Indy 500 (finally!) ... switched gears to original artwork from films and now ready to go in the next couple of days.
Will be offered in backbox decal trimmed as original or bled over past the backbox (no seam). Also we can have the proto (solid) and the production version as well (gradual fade) as well.
 

474
PPS Parts (incl Artwork) In Progress / Re: Demolition Man Plastics set
« on: September 30, 2014, 11:35:07 AM »
Just a little more prep and then confirm that they are good and then they get scheduled to run ... hopefully before end of the year.

475
PPS Parts (and Art) Wish List / Re: EarthShaker Playfields
« on: September 29, 2014, 09:09:36 PM »
Alot of my time is spend getting companies who say they will be doing things to do them ...

476
MMR Updates (READ ONLY) / Coin Mechs
« on: September 29, 2014, 09:02:30 PM »
MMR will come with everything to be coinop except the coin mechs themselves as a decision by Chicago Gaming. While this makes sense for non-US customers to not include, it's a problem for a small set of US customers. To that end, we've acquired some high quality METAL coin mechs and will be selling them for $7/each (vs the normal retail of $29) limit 2 ... so hopefully for anyone needing these you can order them and have it not be a major headache. We don't have a master list of MMR customer list otherwise we would offer this directly to all MMR customers - but logistically we don't have the ability. The game operates on freeplay just fine for the home without them but obviously some people will just want the mechs and do not have any around as they are pretty universal and just clip into the standard MMR coin door which is same as most any coin door.
If interested, you can purchase them here:
You are not allowed to view links. Register or Login
 

477
MMR Updates (READ ONLY) / MMR Update - 9/29/14
« on: September 29, 2014, 01:12:50 PM »
Weekly MMR call (Rick, Doug Duba, Gary Stern, Dave Petersen, Ray Tanzer, Michael O'Donnell, etc)
UL Testing is most critical (and frustrating):

- UL wanting more documentation on transformer and will be slicing a couple of them apart (despite being made by the same transformer company that has been making pinball transformers for a long time ... )
- Door Interlock switch questions - they are asking for 100,000 cycle time switch (which is not what they ask for others making pinball machines), so we are iterating with them on that (100,000 door open and close!). We have the same switch on the game as is on other currently produced pinball machines that UL has tested.
- Transformer Co. has the materials and ready to build in volume, but UL is forcing people to wait until they are finished.
Games at Expo:
- There will be 3-4 MMR's at Expo
Stern Line Setup:
- Continues to be stocked with Parts, etc, waiting for Go on Production
- MMR can start on 2nd Line "anytime" based on finished UL, etc.
- Stern has completed several playfields as part of build test of parts, etc.
 

 

 
 

478
PPS Parts (and Art) Wish List / Re: Shadow cabinet decals
« on: September 28, 2014, 08:24:01 PM »
No, never replied.
rick
 

479
PPS Parts (and Art) Wish List / Re: Johnny Mnemonic Plastic Set
« on: September 28, 2014, 08:22:33 PM »
Looking into

480
PPS Parts (and Art) Wish List / Re: Rollergames and WCS 94 Cabinet decals
« on: September 28, 2014, 08:17:36 PM »
It appears that we do have the Rollergames cabinet art ... so we will look at and see if any issues in getting them done ..., stay tuned.
rick
 

Pages: 1 ... 30 31 [32] 33 34