• December 09, 2025, 08:51:56 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PPS

Pages: 1 ... 28 29 [30] 31 32 ... 34
436
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: November 06, 2014, 12:54:42 PM »
Normally we would have a pre-reserve for an item, but in this case I will take the posting 'want' order on this thread as the pre-reserve. This will not be a pattern, but given that BOP has been in the works for so long it's ok.
 
rick
 

437
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: November 04, 2014, 12:28:29 PM »
For the first batch I'm being told I'm getting at the most 10 ... which may turn into less than 10. Then there will be another batch run after that.
 
rick
 

438
MMR Updates (READ ONLY) / MMR at Dutch Pinball Open this weekend 11/1-11/2
« on: November 02, 2014, 12:24:35 PM »
We had arranged with Ministry of Pinball (Bert) to get an MMR pre-production unit to the Dutch Pinball Weekend, and after some harrowing shipping and customs hoops that we had to jump thru, MMR was at the DPO and played well! I guess someone forgot to tell them that it was already jumpered to 230volts, so it was ready to plug in in Europe!


We will post pictures and feedback as they come in.


rick

439
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 30, 2014, 09:39:40 PM »
I am checking ... not sure, as he did not do many in the first run ...

440
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 30, 2014, 08:48:14 PM »
It's play by play on this one, they are being done in Germany ...

441
PPS Parts (and Art) Wish List / Re: Jokerz! Plastics and Playfield.
« on: October 30, 2014, 08:47:31 PM »
Jokerz plastics are in the queue, we have the original wms artwork, and just getting them into the plan to produce - possibly before end of the year(?).
 
rick
 

442
PPS Parts (and Art) Wish List / Re: Mousin Around cabinet decals.
« on: October 30, 2014, 08:46:35 PM »
Yes, they are in process ... pretty soon.
 
rick
 

443
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 30, 2014, 06:49:46 PM »
Good news is the colors are all on, and nothing bad has been spotted ... so now off to clearcoat, which will be a few passes and then some drying time.
 
 

444
PPS Parts (and Art) Wish List / Re: Barracora everything!
« on: October 29, 2014, 03:52:01 PM »
We'll look around for that one and see what we find ...

445
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 29, 2014, 03:51:31 PM »
that should be 'dibs' ... there aren't too many for the first batch, I think he's only running about 25 ... PPS will get a few of those. Then I will push him to do another run quickly.
 
rick
 

446
We also have Sorcerer backglass going in to the queue behind gorgar ... here is the first version of the artwork combined, still have to do some correcting as well as color adjustment ...
 
 

447
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 29, 2014, 12:49:04 PM »
Those on this forum get first dips on most anything that we will have in limited quantities!
 
rick
 

448
PPS Parts (and Art) Wish List / Re: Bride of Pinbot Playfield
« on: October 28, 2014, 04:25:35 PM »
Black (and last) color is now on ... looking good. So assuming it is all good, then clearcoating and drying next and then ready to go ...
 

449
Cabinet sets are now available - both light and dark blue versions:
 
Light / Production / Later:
You are not allowed to view links. Register or Login
Dark / Proto / Earlier:
You are not allowed to view links. Register or Login
 

450
MMR Updates (READ ONLY) / MMR - Update 10/27/14
« on: October 28, 2014, 01:28:15 PM »
MMR Update Call - (Stern, CGC, PPS):
 
- Still waiting for UL - no major issues found, just seems like it goes until they are done. Apparently lots of testing with a 'new' pinball machine, so UL is testing. Continue short testing this week. Hopeful that testing ends this week. Frustrating, but I'm told there is no 'schedule' when doing UL testing.
 
- MMR is out on location as of last week - at Logan Arcade, in Chicago. Feedback 'amazed that you put such a nice MM in the place', 'only issue is the line to play the game', etc ...
 
- Finishing up all additional pre-production games that Stern is building to test the line.
 
Waiting ... Waiting ... Waiting ...for UL.
 

Pages: 1 ... 28 29 [30] 31 32 ... 34