Planetary Pinball Forum!
Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: glasairpilot on May 18, 2016, 07:02:12 PM
-
Is there anywhere in MMR to safely pull 12V accessory power? With my pre-spike Sterns I use the 12V plug provided and a 8-way splitter from Pinball Life and the Spike units get it from the 48V output and the step down transformer and splitter from Pinball Life as well.
I would like to add undercab lighting and lit flipper buttons. Not much current draw, but want it to be safe for the machine.
-
did you ever find a good source for the 12V?
-
Yep,
Forgot that I had a manual with schematics. Right two lugs of the power supply unit. Should work fine for low current draw stuff.
-
Glasairepilot mentioned the two right lugs of the power supply should work fine for low current draws.
Any chance someone can post a picture of exact place on the power supply to connect the 12V wires (red and black)?
I have an MM Topper and want to make sure that I don't want to make a mistake when connecting. :o
Thanks a ton!
-
I don't have a schematic with me, but if you put a voltmeter on the lugs you should be able to tell which ones.