Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: clavigne on March 09, 2016, 09:15:33 PM

Title: Cannot communicate with playfield
Post by: clavigne on March 09, 2016, 09:15:33 PM

I received my game a couple of weeks ago.  It has been working fine until today.  I'm now getting the message "Cannot communicate with playfield. Please check all connections".  I saw another post about this here: http://www.planetarypinball.com/forum/index.php/topic,563.msg4108.html#msg4108.  I read Lloyd's suggestion to check the blue cable.  I have unplugged the blue cable and plugged it back in, everything seems fine.  It sounds like other people with this problem needed a new board?  Is there something else I can try?  It seems odd that things would work fine for a couple of weeks and suddenly fail.  I played it last night and it was ok, got the error message first thing when I turned it on today.  Any ideas?

Title: Re: Cannot communicate with playfield
Post by: Lloyd Olson on March 09, 2016, 09:48:44 PM

Hello

I would reseat both ends of that blue cable. In the backbox and to the big board under the playfield.

If that doesn't do it, please open a ticket on the Support Desk :

http://www.chicago-gaming.com/

LTG : )

Title: Re: Cannot communicate with playfield
Post by: clavigne on March 10, 2016, 12:04:36 AM

Thanks for the reply Lloyd.  I actually did try both ends before I posted here so I guess I'll open a ticket.

Title: Re: Cannot communicate with playfield
Post by: clavigne on March 10, 2016, 12:13:04 AM

Ticket #579 opened.

Title: Re: Cannot communicate with playfield
Post by: clavigne on March 10, 2016, 10:23:26 PM

I have some more information on this.  There is a red light next to the "watchdog" connector on the controller board in the backbox.  I wasn't sure if this was right or wrong, but I unplugged the watchdog and plugged it back in this afternoon.  When I turned the game back on it started up without error.  I played a few games and everything was fine.  I went to play the game tonight and now I get the error message again about not being able to communicate with the playfield.  I tried re-seating the watchdog connection again but that didn't work.  I also tried running a different ethernet cable thinking maybe I just had a bad cable but that didn't work either.  Does this mean the board in the backbox is just going bad and it was a coincidence that re-seating the watchdog connection fixed it temporarily?  I've attached a picture of the board so you can see where the red light is on.

Title: Re: Cannot communicate with playfield
Post by: Gibo on March 12, 2016, 07:04:33 AM

We had to replace the main board under the playfield to fix the game you linked to in your first post not the backbox board.