Show Posts
1
MMR Support [MMR Members Only] / Issues with the left "Peasant" Ramp lift
« on: September 09, 2015, 02:29:17 PM »
Hi Folks,
I have an issue with the Ramp edge of the left Peasant ramp. The metal flap if lifting on the left edgeand causing the ball to bounce up and subsequently is denting the playfield. It is frustrating because it blocks the ramp on the left side and slows the right side shots enough that we often don't make the ramp.
I have included a picture I took with the glass still on. Not the best, but you can easily see the left edge lifting.
I will admit that I am a pinball machine noob, and MMR is my first machine. So be gentle.
I tried loosening the ramp and gently re-bending the ramp flap, but it seems to just return to the normal position. I also tried a piece of double sided tape (10lb stuff from 3M) back from the edge. This held it down flush for a few days, but did not keep it in place.
If you have any advice on how to fix this, I'd be most grateful!
Thanks in advance.
I have an issue with the Ramp edge of the left Peasant ramp. The metal flap if lifting on the left edgeand causing the ball to bounce up and subsequently is denting the playfield. It is frustrating because it blocks the ramp on the left side and slows the right side shots enough that we often don't make the ramp.
I have included a picture I took with the glass still on. Not the best, but you can easily see the left edge lifting.
I will admit that I am a pinball machine noob, and MMR is my first machine. So be gentle.
I tried loosening the ramp and gently re-bending the ramp flap, but it seems to just return to the normal position. I also tried a piece of double sided tape (10lb stuff from 3M) back from the edge. This held it down flush for a few days, but did not keep it in place.
If you have any advice on how to fix this, I'd be most grateful!
Thanks in advance.