• February 23, 2024, 03:08:26 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dendoh

Pages: [1]
1
Game #3 Discussion / Re: MBr
« on: August 12, 2017, 08:59:23 AM »
Thanks Lloyd.


I just hope I am still around by the time they get to actual production.


Which is why I suggested it to CGC.  ;)


dendoh

2
Game #3 Discussion / Re: MBr
« on: August 11, 2017, 09:48:05 AM »
I can't believe that no one is mentioning a remake of The Pinball Circus.
There are only two games known to exist.
Rick - Please ask CGC to at least consider it. I think they would do very, very well with this title.


Thanks,
dendoh

3
MMR Support [MMR Members Only] / Re: Catapult power settings
« on: March 17, 2016, 08:43:24 AM »
You use a six inch bubble level and an inclineometer. Both available at Home Depot.


4
MMR Support [MMR Members Only] / Re: MMR suddenly not keep date/time
« on: January 10, 2016, 09:16:52 AM »


Quote:
"The software update seems to have fixed my problem, I never touched the battery.  I recommend everyone getting the update anyway as it does eliminate the tearing and a few sound issues."



Is there a page to download this software update from? Hopefully with instructions on how to apply it.
Thanks

5
MMR Support [MMR Members Only] / Re: MMR suddenly not keep date/time
« on: January 09, 2016, 09:47:09 AM »
I guess no one wants to take the advice I posted above.


Again, replace the 2032 battery on the pinball controller board. It appears that it needs at least 3.0 volts to maintain its memory. Read my above comment.


I am not sure a software update can fix that.


What would fix it is a 3 volt power supply. Just my opinion. If I am wrong, please let me know.


Thanks, Dennis
PS: Love my MMRLE! A quality product! It was well worth the wait.

6
MMR Support [MMR Members Only] / Re: MMR suddenly not keep date/time
« on: November 21, 2015, 10:50:24 AM »
I had the same issue and replaced the CR2032 battery on the board in the back box. That cleared up the problem.
I then checked the old batteries voltage with my VOM and it read 2.99 volts.
So it appears the board wont maintain data with anything less than 3 volts.
Maybe some of the batteries that are on the boards are marginal.
It is a good idea to replace the batteries on any machine you purchase anyway.
Make sure you replace the battery with the machine off. You don't want to accidentally touch the circuit board with it.


Dennis


7
MMR Support [MMR Members Only] / Re: Left gate stuck closed error
« on: November 01, 2015, 02:25:22 PM »
I adjusted the switch as you suggested and the error cleared up. Just as you said it would.


You are the best!


Thank you Lloyd,
Dennis


8
MMR Support [MMR Members Only] / Left gate stuck closed error
« on: November 01, 2015, 11:06:30 AM »
I am getting a "Left Gate Stuck Closed" error. The coil works and it appears to be opening and closing the gate.
When I am playing a game I am able to do a Super Skill Shot (which means the gate opens). It also stays closed for a regular skill shot.
Interestingly, during the Solenoid tests, number 27 and number 28 the right and left gates operate with the door open. Wonder if that happens on all MMRLEs? Or is that an indication of the problem? The drawbridge also opens during the Solenoid tests while the door is open.
I would appreciate any help or suggestions.
Thank You,
Dennis


9
PPS Parts (and Art) Wish List / Re: EarthShaker Playfields
« on: November 25, 2014, 10:15:47 AM »
I need one also.  :)

Pages: [1]