Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: Cam on October 30, 2016, 02:57:55 PM

Title: Dragon Mod
Post by: Cam on October 30, 2016, 02:57:55 PM

Hi Lloyd
Please advise if installing the 2 headed dragon mod outlined below would:
1. void the warranty
2. potentially overload the circuity and cause problems... Would it only be anticipated to cause issues during extended gameplay... E.g. After several hours or more?


[font=.HelveticaNeueUI]http://wolfsoft.de/download/Installing_Manual_Two_Headed_Dragon.pdf[/font]

Title: Re: Dragon Mod
Post by: Lloyd Olson on October 30, 2016, 03:29:28 PM

I would imagine it would void the warranty.

Williams shoots a fast jolt of 20 volts to flashers, MMR is 12 volt, so no idea if it would even work.

LTG : )

Title: Re: Dragon Mod
Post by: Cam on October 30, 2016, 10:26:06 PM

Interesting, thanks Lloyd... Any idea if PPS is considering producing a similar product?

Title: Re: Dragon Mod
Post by: Lloyd Olson on October 31, 2016, 11:40:23 AM

No idea. Maybe Rick will respond.

LTG : )

Title: Re: Dragon Mod
Post by: PPS on November 01, 2016, 01:16:56 PM

we are working on a transluscent dragon which would then be open to modding to put LED's in it to light it up.


rick

Title: Re: Dragon Mod
Post by: Cam on November 01, 2016, 09:47:36 PM

Thanks Rick... Any chance of having that dragon all lit up and ready to plug into the flasher?  I would prefer something officially sanctioned and turnkey, particularly when electricity is involved as I would not want to risk overloading any circuits... It would also mean more revenue for PPS as this could be at a materially higher price point...


Obviously there are tons of mods available for MM... A couple of others that would capture my dollars would include:
There is a very cool MM troll mod with lit eyes that flash when struck...

And lastly there is a MM goblin mod that sits atop the Peasant ramp with eyes hooked to a flasher...
Thx

Title: Re: Dragon Mod
Post by: PPS on November 02, 2016, 10:07:42 AM

We will provide a variation of the Dragon and then reach out to mods that can light it up. We are way involved in too many projects to try to figure out mods with LED's.


Rick

Title: Re: Dragon Mod
Post by: bob on December 07, 2016, 10:17:45 PM

We replaced the dragon on our MMR with vinyl figurine of Toothless from "How to Train Your Dragon." It has a five-inch wingspan and looks great. :)