• December 07, 2024, 12:23:24 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Troll carriage broken weld  (Read 25274 times)

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Troll carriage broken weld
« on: May 24, 2016, 01:03:40 AM »
Just unboxed MMr Le 839 and discovered during the first game that the troll carriage had a broken weld where the switch attaches. The troll was not centered when raised and moved a little when hit by a ball. I have disabled the left troll in the adjustment menu. I have attached a picture of the broken weld that causes the issue.


I have submitted support ticket #670 with Chicago Gaming.
 

Offline mbuawa

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 37
  • Karma: +1/-3
    • View Profile
Re: Troll carriage broken weld
« Reply #1 on: May 24, 2016, 09:56:24 AM »
Worst picture ever, try again

Offline PPS

  • Administrator
  • Five Star Member
  • *****
  • Posts: 1185
  • Karma: +60/-37
  • PPS Owner
    • View Profile
Re: Troll carriage broken weld
« Reply #2 on: May 24, 2016, 10:25:09 AM »
That would be a ticket to chicago-gaming.com via their helpdesk ...


rick


Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #3 on: May 24, 2016, 10:38:28 AM »
Picture was good enough for Chicago Gaming, they have already responded to the ticket.

Offline glasairpilot

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 87
  • Karma: +5/-4
    • View Profile
Re: Troll carriage broken weld
« Reply #4 on: May 24, 2016, 12:01:40 PM »
I can't see the break either due to the blurriness.  I am curious what broke if you have another picture.

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Troll carriage broken weld
« Reply #5 on: May 24, 2016, 01:14:15 PM »
You are not allowed to view links. Register or Login
I can't see the break either due to the blurriness.  I am curious what broke if you have another picture.

The metal bracket that holds the troll face leaf blade switch.

The locknut should be facing forward, not to the side.

LTG : )

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #6 on: May 24, 2016, 10:05:49 PM »
As Lloyd said right above the locknut. On the left troll you can see the break just below the trolls chin.


 

Offline mbuawa

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 37
  • Karma: +1/-3
    • View Profile
Re: Troll carriage broken weld
« Reply #7 on: May 25, 2016, 10:18:53 AM »
ah, now I see it. Are they sending you a replacement?

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #8 on: May 25, 2016, 11:38:05 AM »
CGC responded to my ticket that they were sending a replacement.

Offline mbuawa

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 37
  • Karma: +1/-3
    • View Profile
Re: Troll carriage broken weld
« Reply #9 on: May 25, 2016, 11:53:55 AM »
nice, yeah they seem to respond good to real issues. Some people complain they never hear back, but I think it's just those people whining about the inserts.

Offline glasairpilot

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 87
  • Karma: +5/-4
    • View Profile
Re: Troll carriage broken weld
« Reply #10 on: May 25, 2016, 02:35:56 PM »
Doug responded immediately to my insert issues.  He was very nice on the phone.  I still do not agree with the explanation for the inserts, but I will say that mine are definitely better than many I have seen, but not as good as the early production runs.


Anyway, I wish CGC and PPS well.  I really like my MMR and am interested to see what else they remake.  Not interested in AFM, but would love to have a CV and a new TZ.

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #11 on: June 09, 2016, 09:12:53 PM »
17 days and still "Being Processed   since 16 days 20 hours". Sure would like to have both trolls working.

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #12 on: June 11, 2016, 04:33:32 PM »
Got an invoice today from CGC for the broken carriage assembly. I must return the broken part within 14 days, however according to the UPS tracking number they haven't shipped the part yet. I guess I should be glad that I have a UPS tracking number. 

Offline cataylox

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Troll carriage broken weld
« Reply #13 on: June 14, 2016, 03:39:32 PM »
Troll has been fixed. Thanks CGC for getting me the part.