Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]
Diffuser Help...
surfajl77:
I am in the process of installing my diffuser, starting with the smaller bits first and I have a couple of questions:
1 - If you look at the picture of L78 RIGHT, it has three screws and sits nice and flush against the bottom of the playfield. However, the board for L78 LEFT only has two screws and one open hole. Since both L78 styrene pieces have three holes, I thought maybe one of the screws fell out. However, I see no indication that a screw was ever placed there, as there is no hole in the playfield. As a result, the piece doesn't really sit flush. Is this normal?
2 - In the instructions (at the end), it says to re-install L74 and L86 OVER the existing large piece of styrene. I'm pretty sure these are the Shoot Again and the bottom king insert. So, just to clarify, I'm supposed to install the big board first, and then install these smaller ones OVER it? So you're basically doubling up on those inserts? Seems kind of odd, or am I missing something here?
1PinballKnight:
Surfajl77, you don't think they are doubled up because the inserts that are above are the worst with the ink or transparency problem do you? Just a thought, R
surfajl77:
I think it goes in a different place that I haven't located yet. I don't know. The instructions that they slapped together aren't very good. I'm sure if you know your way around a pinball machine, it's not so bad. But for someone like me who is still relatively new to all this, I don't think I can install it without recruiting outside help - which is a rather annoying expense that I wasn't anticipating when buying this game. >:(
1PinballKnight:
I think they all go in one unique place and shouldn't be overlapped. Just wait a bit and we should get more info. It is a bichin game that was reproduced to today's updated standards with cool additions added on.
surfajl77:
Maybe one day someone will post a How To video.
Navigation
[0] Message Index
[#] Next page
Go to full version