Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]

Catapult power settings

<< < (2/2)

dendoh:
You use a six inch bubble level and an inclineometer. Both available at Home Depot.

Bmore:
You are not allowed to view links. Register or LoginThe iphone level will get you close enough, but something like this is what you want if you have the extra cash    HAMMERHEAD_HLLT10_10-Inch Digital Level with Laser You are not allowed to view links. Register or Login

--- End quote ---

Yeah, I've got one of these and I'm at around 6.7 degree pitch. Moving the wireform left/right will not help, and hitting the flasher dome is not every time but just occasionally
Rather than trying to bend the wireform, it would be great to be able to play with the strength since the SW can support that (just not go below default right now)

Rudyhead:
That is really strange. Maybe you could video it and try to see what is happening when it goes off course and hitting the flasher?  The only other thing I can think of is that the catapult launcher arm itself is a a little off or loose?

Vongoosewink:
I have the same problem - the catapult default is the lowest setting, and on my machine it bashes the flasher light 2/3 times. :o

I've tried adjusting the pitch of the table and the ramp attachment at the top, nothing helps.  I worried, it is beating the flasher to hell and it is frustrating to play.   :(

Lloyd Olson:
Have you tried loosening the nut and moving the wireform tiny bits at a time until you hit the sweet spot where it doesn't effect the flasher ?

All the way to the right should be way far away from the flasher.

LTG : )

Navigation

[0] Message Index

[*] Previous page