Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]

Slam tilt switch is stuck closed

(1/3) > >>

clavigne:
Just received my machine today.  I got it all set up but can't play because I'm getting an error message that the "slam tilt switch is stuck closed".  I believe this is one of the leaf switches by the coin door, correct?  If that is the case, neither one seems to be stuck in the closed position.  If I disconnect the coin door harness in the back box the error goes away as expected.  I've attached a picture of the coin door harness because it's got one spot where there's no wire connected.  I wasn't sure if that's the way it's supposed to be or not.  Any help on how I could fix this would be greatly appreciated.

cataylox:
The missing wire is normal. According to the schematics its used for the coin lockout and is not used in MMR. Could you post a picture of the slam tilt switch in the coin door?

clavigne:
Thanks for the reply. Here's a shot of the coin door switch.

cataylox:

[size=78%]There should be another switch inside the cabinet by the plumb bob tilt or on the cabinet floor by the coin box. Sorry I don't have an MMR yet to get an exact location for you. [/size]

Lloyd Olson:
One on the coin door, and one on the floor of the cabinet on the left side of the cash box.

LTG : )

Navigation

[0] Message Index

[#] Next page

Go to full version