Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]

L gate stuck closed then r gate stuck open???

<< < (2/2)

Bigboy:
You are not allowed to view links. Register or LoginYou are not allowed to view links. Register or LoginThe thing is, one gate loop test will pass, but not the other. then after running a solenoid of the "bad gate" and then re-testing the loops again, that loop will pass now (the affected gate opens when it's supposed to) but now the gate (loop test) that didn't have the issue will not pass. I can get each one to pass the loop test which tells me that everything is working, as far as hardware. but I can't get them both passing at the same time. I've checked all the switches several times along that path and they are all working fine by rolling the ball or pressing them. they all read closed when they are pressed and open when they are open (when reading with a multi meter). it's a strange issue that doesn't make any sense.

but in effect the gate that I last tested working will now allow joust and skill shots. (but the other one will not)

but like I said, I'm going to mess with it again tomorrow. I'm hoping that by resetting the game or maybe re-installing the last update you sent it will clear the issue. Check the solenoid spring it goes up through the playfield and when the orbit switch is activate the solenoid pulls the gate open my spring became energized and broke off its very tedious to replace that spring!

thank you,
greg
 hey Greg check to see if the spring that goes up through the the playfield Ian t broken or detached from the rt. loop hate it pulls on that gate to open it when the left loop switch is activated mine broke after 6 months of play and it's not easy to replace!
--- End quote ---

--- End quote ---

hocuslocus:
ok, I still don't understand why certain loops work only certain times in gameplay. I guess that's just the way it's supposed to play. but after testing the loops several times everything seem to be okay now with the loops themselves now in testing mode. not sure what happened or if I was doing something wrong. but thank you for your replies

Navigation

[0] Message Index

[*] Previous page