Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]

MMR insert text is thin and transparent

<< < (3/22) > >>

IndianaPwns:
You are not allowed to view links. Register or LoginThey are looking into it, I can tell you that many of the pictures are in completely different light, angle, ambient light, mm vs mmr, etc and so it's really hard to compare one vs the other to get a clear picture of any differences. But I did make sure Doug Duba at Chicago Gaming was aware of the topic, and he will look into to it. I've also alerted Stern production manager of it as to see if they can see it, apparently whatever is going on is not obvious and not sure under which light or conditions, etc.

--- End quote ---

Hey Rick, thanks for the response. A great way to check for them would be to look at the "Jackpot" and center line of inserts leading up into the castle and compare them to the others (Catapult, Joust, Peasant, Castle...etc. The difference is obvious even without light underneath. They are faded/transparent when the others are opaque.

Pablito:
Thanks Rick. Just so we're all on the same page, the problem only shows when lit. When the machine is off, the black text in the inserts looks fine. And the comparisons I have seen are between earlier runs of MMR (up to 400ish look fine) vs newer runs (600ish and up have faded black text). The worst of the fading is in the castle inserts, followed by the catapult, peasant, madness, damsel, joust inserts in no particular order. The jackpots, locks, fire, and the blue inserts leading up to the castle all appear to be much more legible.

Drewblood419:
Here is a video I just made of my MMR so people can see the difference between good and bad inserts on MMR As you can see the castle crusher insert is correct but the surrounding inserts are transparent. I chose to pick these because it shows both what they should all look like versus what the problem inserts look like on the same machine in the same light backlit and not backlit. Keep in mind these are not the worst inserts on the machine and that should tell you a lot
Here is a short clip

You are not allowed to view links. Register or Login

PPS:
same ink on all the inserts, the pattern of the inserts is different may have something to the way light is reflected and diffused, not sure if it's the light hitting the insert pattern underneath differently or if something else. CGC will have to see if they can see what people concerned about.

Lowrent:
It's not related to the insert type (frosted or whatnot). The blue inserts all have a white border. Black text screened over white. Two layers of ink, less light passing through. Simple.

Navigation

[0] Message Index

[#] Next page

[*] Previous page