• February 25, 2024, 06:10:45 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Selt Test Error - Lt troll Up Switch is bad  (Read 6269 times)

Offline rbeauch2

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Selt Test Error - Lt troll Up Switch is bad
« on: January 06, 2016, 07:36:17 PM »
Upon startup the self test reports that the "left troll up switch is bad". Both trolls appear to be working just fine. Can anyone tell me how to fix this error.

Thanks
Bob

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Selt Test Error - Lt troll Up Switch is bad
« Reply #1 on: January 06, 2016, 08:54:48 PM »
Hello Bob

 Please go into Tests - Switch Edges. Under the playfield you can see the left troll/plunger/coil assembly. There is a micro mini switch the troll carriage closes going up, and opens when going down. Push the switch and see if it's working.
 It may need adjusting, or cam unplugged from the big board under the playfield it plugs into.

LTG : )