Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]

Ball consistently down middle from the Right upper chute

<< < (3/3)

PWhiz:
The strange thing that I found is that the manual suggests setting the pitch so that the bubble is between the first and second of the small segmented lines(ie. not the main big gap), and that is supposed to be 6.5deg.  But when I use a level on the playfield with the bubble in that position, it does not indicate 6.5.  In order to achieve 6.5 I have to raise the front about an inch or so and the bubble is way off the indicated mark.  So I really don't know which is right.  What the manual suggests, or what my level says is 6.5.

As it stands now, the ball hasn't been hitting the top of the sling that often, so I'm hesitant to mess with it anymore.

Bmore:
Mybu level indicator was way off, when I adjusted it according to manual and then measured the pitch it was over 9 degrees. Best not to trust the bubble, but adjust the pitch to actually be aroung 6.5 degrees.


Is your pitch higher now, and did the ball coming down faster help?

PWhiz:
If you were asking me, I have it set at true 6.5 right now and it seems to be playing fine.  Ball isn't coming down too fast or slow.  About right. 

For a bit there I was having an issue with the ball having the tendency to hop off the wireform return to the left flipper at about midway or just above the left sling.  This was in part due to trying to fix/adjust my catapult being inconsistent and also not being able to eject more than one ball.  I had been playing around with different solenoid power settings and I ended up finding that if I left it at default, it actually started working better.  It was weird because it had seemed weaker at that setting before.  I don't know, pinball is weird, haha.

I just got myself into a situation where I was making all sorts of adjustments here and there and I think things were starting to get a bit out of whack and it took some time to get things dialed back in.

I think for the most part I have it playing like it should, except for the bozo standing between the flipper buttons.  Still working on that one. ;)

Navigation

[0] Message Index

[*] Previous page