• October 13, 2024, 08:48:44 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Bill Validator  (Read 22517 times)

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Bill Validator
« on: April 15, 2015, 01:30:53 PM »
For anyone wanting to install a bill validator, here is what I found that works quite nicely.

ICT  US4 12 Volt 300 capacity.

Larger capacity won't let you close the coin door.

LTG : )

Offline Coltop

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Bill Validator
« Reply #1 on: May 05, 2015, 10:31:57 PM »
Did you try any other validators before settling on the ICT?


I was shocked to find the harness was running 12v

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Bill Validator
« Reply #2 on: May 06, 2015, 02:14:27 AM »
No, in searching ICT from Happ was the best price I found.

Then I had to find an ICT 300 stacker, Happ only has 500 and that won't fit.

People have suggested Pyramid, though I have no experience with them.

LTG : )

Offline hocuslocus

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 53
  • Karma: +2/-0
    • View Profile
Re: Bill Validator
« Reply #3 on: October 08, 2015, 11:23:25 AM »
I used an mei ae 2600 with a 300 bill magazine. but I'm having an issue with the bottom of the dba clipping the top of the coin box and moving it. In result the coins don't drop in the designated spots and get jammed. I finally took out the metal top of the coin drop box. The dba still moves the box but at least it works.

If they made the bottom of the cabinet 2mm deeper this would of solved the dba issue. I tried a coinco dba as well and it seemed to do the same thing. so either I'm doing something wrong or this game was never actually meant to have a bill acceptor installed.

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Bill Validator
« Reply #4 on: October 08, 2015, 01:17:58 PM »
They aren't doing anything wrong. You run into this on many Williams pins.

Secure the cable under the validator better helps. Many ops simply cut a piece out of the front top of the coin box.

LTG : )

Offline aveamike

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Bill Validator
« Reply #5 on: August 24, 2016, 11:36:18 AM »
i have a question.

the MMR nine pin is male and the nine pin on the validator harness is male also.
how do you connect these two?

thanks

mike

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Bill Validator
« Reply #6 on: August 24, 2016, 01:46:51 PM »
MMR has a female connector where the bill validator plugs into.

If yours is different, could you please post a picture ?

LTG : )

Offline aveamike

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Bill Validator
« Reply #7 on: August 25, 2016, 09:58:23 AM »
here is a photo

Offline PPS

  • Administrator
  • Five Star Member
  • *****
  • Posts: 1185
  • Karma: +60/-37
  • PPS Owner
    • View Profile
Re: Bill Validator
« Reply #8 on: August 25, 2016, 01:02:44 PM »
part of the transgenger movement for sure ...

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Bill Validator
« Reply #9 on: August 25, 2016, 02:08:36 PM »
You are not allowed to view links. Register or Login
here is a photo

Thank you for your help.

Please open a ticket under Support at CGC -  You are not allowed to view links. Register or Login

If it comes to me I'll kick it up to the engineers and see what they can do.

LTG : )