• December 03, 2024, 09:49:07 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Starving for news...  (Read 30206 times)

Offline paynemic

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 67
  • Karma: +0/-0
    • View Profile
Starving for news...
« on: April 24, 2017, 11:16:13 PM »
Anyone have any updates on timeline, etc?  Please...

Offline PPS

  • Administrator
  • Five Star Member
  • *****
  • Posts: 1185
  • Karma: +60/-37
  • PPS Owner
    • View Profile
Re: Starving for news...
« Reply #1 on: April 26, 2017, 02:03:16 PM »
There should be an update soon, but things are going well. Final approval for production was signed off by WMS as well as UL Certification had been done a while ago, so I would expect that CGC will update on when first games will come off the line, which was last quoted as "May"


rick


Offline Flowst

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 32
  • Karma: +0/-0
  • Aviator
    • View Profile
Re: Starving for news...
« Reply #2 on: April 28, 2017, 10:53:33 AM »
Hi,
Will you guys be at Pinfest in Allentown PA next week?  Would be great to meet you all and see the game.

Offline bagajellydonuts

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
Re: Starving for news...
« Reply #3 on: May 24, 2017, 10:46:18 PM »
Curious, on Pinside there is mention of backboard art work.


I'm in on a LE, I understand that it will arrive with mirror sides. Is this backboard artwork a new addition or is there some last minute changes going on?












Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Starving for news...
« Reply #4 on: May 24, 2017, 11:25:09 PM »
Rick will probably chime in here.

I haven't heard any news on back board art other than Pinside.

LTG : )

Offline rand

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 51
  • Karma: +0/-0
    • View Profile
Re: Starving for news...
« Reply #5 on: May 30, 2017, 02:43:26 AM »
Lloyd I have a question that I figured inside people such a yourself would be able to answer and that is about the components and parts for this game and the others to come .
The question I have is , are the vendors from the last game MMR doing the prep stage components for this game ,  my concern as many others have outlined in the 1st showing of the new AFMR in what ever venue it was shown at and the point here is the playfield and yes I did look at the playfield and what others had mentioned on the "chipping aspect" ....normal play does not account for such severe chipping I should know as my MMR has over 500 plays and no problems at all noticed on the playfield at all ...including heavy bashing going through the castle ..
So if by chance a machine runs 50 games ,like on this AFMR and it starts showing signs of the severity of the playfield chipping as shown on the 3 or so machines shown at the show ...are we to take this as "Normal play" ..??? Just asking as let me tell you and Chicago gaming , I get flaking and chipping  on my new 10K + machine within a few months , Yes I maybe pissed ..
So my  question is are these playfields being manufactured at the same facility and manufacture as the MMR ..??

Just a question of concern ,, no this is not a Mercedes , but it is 10K + and I am looking for a little bit of endurance, reliability and wear .
Yes up here to the North of you all its a bit different to purchase one of these and its like getting a mortgage for a home ..to be frank its just over 13K including tax's and delivery .. so yes I would like something without issues .

Just a point of view and a reasonable question that should be easy to answer .

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Starving for news...
« Reply #6 on: May 30, 2017, 02:17:36 PM »
I'm not really inside. I'm more after the fact.

I wouldn't worry about the playfields. The three AFMR's and MMR at Texas had seen heavy use at an industry show and then went to Texas Pinball Festival. The one had a chip at the kickout, which in production is coming with a protector there. The other two AFMR's and MMR showed no signs of chipping.

CGC is making playfields and cabinets for AMFR, just like they did with MMR.

I hope this helps you.

LTG : )

Offline rand

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 51
  • Karma: +0/-0
    • View Profile
Re: Starving for news...
« Reply #7 on: May 30, 2017, 04:51:59 PM »
Lloyd you put my mind at rest and my trust is in your rapport.
I don't think I'am alone on questioning anything on these machines as they are now up to 2-3 x's the cost from original's and friends and acquaintances do still ask...
 
At this price for a toy ...Are you "all-right" or just going through a mid life crisis ...lol..

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Starving for news...
« Reply #8 on: May 30, 2017, 08:45:22 PM »
It should be pointed out that the cost isn't quite 2-3 times the cost of the original.

My AFM was $3400

The Classic at TPF unveiling was $6500. So not quite $6800 at 2 times. And two coats of clear on the playfield instead of one like Williams had. And warranty of 6 months electrical and 3 months of mechanical. Williams didn't offer me any warranty.

The SE at TPF was $7200. But for the extra $700, you get bigger display, metallic finish saucers, and tri color led show on the saucers. And warranty is twice as long as the Classic.

The LE at TPF was $7900. And for $700 more you get choice of green, black, or stainless trim, mirror side blades, big topper with saucers and great light show, and twice the warranty as the SE.

While this is a lot of money, none reach three times the original. And for each model up the ladder, not just a price increase, you are also getting more value.

And I entered the 1995 $3400 into one of those on line inflation calculators, and it comes to $5483.43 in 2017 dollars.

All things considered, I think PPS/CGC did a hell of a job !

LTG : )


Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Starving for news...
« Reply #9 on: June 01, 2017, 06:49:58 PM »
Doug Skor posted pictures on Pinside. Post #274

You are not allowed to view links. Register or Login

Things are getting real.

LTG : )

Offline WillieCheft

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
order prescription drugs online k15qtr
« Reply #10 on: October 27, 2024, 04:49:31 AM »
You actually said it fantastically!
canadian pharmacy phone calls  You are not allowed to view links. Register or Login walmart pharmacy online refills