Medieval Madness Remake (MMR) > MMR Support [MMR Members Only]
Difficulty shooting Merlin Magic
Turbo27:
Finding it increasingly difficult to hold a ball into Merlin Magic.
A sweet shot particularly from the left flipper fires straight through. About the only way I seem to hold a ball in there is from a miss-hit after it hits something else slowing the momentum of the ball.
Anyone else ??? Any modifications suggested???
Thank you
gliebig:
I don't know. Any place to stick some foam back there?
Mine stays in the hole 95% of the shots.
schonb25:
Same on the original. Some drop dead foam on the back of the metal will help a lot.
Turbo27:
Thanks for the replies.
Tried the foam and even re-tensioned the spring on the gate entrance.
No improvement
Almost as frustrating as mode start on Indy!
whoeverwhocares:
There must be something that isn't set right or is off a bit near the hole. Based on what people say on here I expected it to be a lot worse when I got mine, but it stays in 99% of the time. I should add that I have the Mantis protector and the front comes up a hair higher than the playfield, which may help deaden the ball, but it doesn't impede it's path in any way.
Navigation
[0] Message Index
[#] Next page
Go to full version