• October 10, 2024, 07:46:49 AM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Bride of Pinbot Playfield  (Read 180706 times)

Offline 85vett

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #75 on: November 14, 2014, 02:00:34 PM »
BOP 2.0 Kits look to be trickling out in Europe now.  US sounds to be close.  Would be awesome to get my 2.0 kit and PF about the same time.  Either way, I spent the last 4 days stripping my game.  Full on restoration has started.

Only thing finished so far is the backpanel light board.  Stripped down, repainted, cleaned harness and polished hardware :-)


Offline cheddar

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #76 on: November 14, 2014, 02:31:18 PM »
looks new vett! nice work

Offline Chet

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #77 on: November 15, 2014, 09:31:17 AM »
Shines like a new Penny!!  about what is the cost for the BoP 2.0 now?  I am still riding the fence, I played it at EXPO and like it, almost like a different game. 

Offline 85vett

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #78 on: November 15, 2014, 03:08:32 PM »
About 2 grand with all the accessories.

Offline cheddar

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #79 on: November 18, 2014, 01:55:09 PM »
it's got to be soon now. I think we should start seeing pics of the cleared playfields.....now.............now!

Offline Crashramp

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #80 on: November 20, 2014, 05:13:56 AM »
I'm on the list and so happy that these are happening. I'd also love to see the drive wheel part number #03-8476 reproduced. Mine is worn and the head unit oftern has issues as a result. Any chance of these being done again?

Offline thedrewster

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #81 on: November 20, 2014, 02:40:54 PM »
You are not allowed to view links. Register or Login
I'm on the list and so happy that these are happening. I'd also love to see the drive wheel part number #03-8476 reproduced. Mine is worn and the head unit oftern has issues as a result. Any chance of these being done again?

I, too, had a hell of a time trying to find one for my machine. Ended up finding two, one of which came from a Twilight Zone. I am looking into possibly getting these reproduced.

Offline cheddar

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #82 on: November 20, 2014, 02:43:33 PM »
Is it possible to delete a post?
« Last Edit: November 20, 2014, 02:58:07 PM by cheddar »

Offline Crashramp

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #83 on: November 20, 2014, 03:17:44 PM »
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
I'm on the list and so happy that these are happening. I'd also love to see the drive wheel part number #03-8476 reproduced. Mine is worn and the head unit oftern has issues as a result. Any chance of these being done again?

I, too, had a hell of a time trying to find one for my machine. Ended up finding two, one of which came from a Twilight Zone. I am looking into possibly getting these reproduced.


That's great news thedrewster! My fingers are crossed that you get these happening. I'm in for one, hell I'd buy several if it helped make this happen. I'm sure I'm not the only one either.
Cheer
Adam

Offline mollyspub

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #84 on: November 20, 2014, 06:58:34 PM »
any eta on when we can expect to be contacted for those of us who are lucky enough to be on the list for the first run ?

Offline mollyspub

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #85 on: November 21, 2014, 04:50:33 PM »
rick,  there are postings on pinside about issues with the clearcoat and delays on release dates. can you confirm this ?

Offline PPS

  • Administrator
  • Five Star Member
  • *****
  • Posts: 1185
  • Karma: +60/-37
  • PPS Owner
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #86 on: November 21, 2014, 05:50:40 PM »
Yes, the clearcoat guy screwed up the clearcoat and the playfields have to be re-screened ... this kindof stuff happens more than you think, which is why it's great that people with peter step up to make playfields. Latest is that he is ready for screening in the next week or so hopefully.
 
rick

Offline Toucanf16

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #87 on: November 21, 2014, 08:04:12 PM »
Take the time to make the right.   


BTW, is there an official wait list posted anywhere?

Offline 85vett

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #88 on: November 22, 2014, 12:25:29 AM »
Bummer.  Sounds like this vendor has had issues with clear coat in the past too.  Hopefully they get it worked out quickly.  I'm racing them and right now I'm kicking their butt :-)

All coils and coil brackets have been cleaned, tumbled, polished and re-assembled.  All boards have now been cleaned and all connectors replaced and any previous owner hacks have been repaired.  All wire harnesses have been thoroughly cleaned.  No more dirt and they smell oh so pretty now. LOL!!!   Working on the cab more now.

One of 3 tables full of restored parts ready for a new home.




Offline Chet

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Re: Bride of Pinbot Playfield
« Reply #89 on: November 23, 2014, 06:35:43 AM »
You are not allowed to view links. Register or Login
Yes, the clearcoat guy screwed up the clearcoat and the playfields have to be re-screened ... this kindof stuff happens more than you think, which is why it's great that people with peter step up to make playfields. Latest is that he is ready for screening in the next week or so hopefully.
 
rick
Does that mean that all of that first run of PF's were ruined??  What does "re-screened" mean?  The same messed up PF's :-\