Basic HTML Version
Right Flipper
pIn
C-11626·R·3
Item Part No.
Description
1 HW-30018-6
Wire, 18 AWG, Blue
2 03-7520-2
Ty-Wrap, Nylon
3 20-6516
Speed nut, Tinnerman
4 5045-12098-00
Capacitor, 2.2IlFd, 250V, 20%
5 RM-21-06
Sleeve, Vinyl (Cap. leads)
6 4010-01066-06
Cap Screw, 10-32 x
3/8,
SH
7 4701-00004-00
Lockwasher, #10 split
8
A-12111
Flipper Stop Assembly
9 FL-11630
Flipper Coil (Red), (. - Refer to Note 3)
10 4006-01017-04
Mach. Screw, 6-32 x
1/4,
P-RH-S
11 01-7695
Solenoid Bracket
12 10-376
Coil Plunger Spring
13 B-10655-R
Crank Link Assembly, Right
a)
02-4179
Link Spacer Bushing
b)
4010-01086-14
Cap Screw, 10-32 x
7/8,
SH
c)
4700-00023-00
Washer, 5/8 o.d. x 13/64 i. d. x 16 gao
d)
4701-00004-00
Lockwasher, #10 split
e)
4410-01132-00
. Nut, 10-32 ESNA
n
A-10656··
Flipper Link Assembly
1.) 02-4219
Coil Plunger
2.) 20-9370-1
Spring Pin,
5132
dia. x
7/16
3.) 03-8050-1
Flipper Link
g)
B-l0657-R
Flipper Crank Assembly, Right
1.) 01-8073-R
Flipper Crank, Right
2.) 17-1037
Crank Washer
3.) 4010-01066-18
Cap Screw, 10-32 x
1-1/8,
HCS
4.) 4410-01127-00
Nut, 10-32 Hex Hd.
5.) 4700-00107·00
Washer, 5/8 o.d. x
13/64
i. d. x 12 gao
6.) 4701-00004·00
Lockwasher, #10 Split
7.)
RM-23-06
Tubing, H. S.
1/4
DWP
14 23-6577
Bumper Plug
15 03-7568
Flipper Bushing
16 4006·01005-06
Mach. Screw, 6-32 x
3/8,
P-PH
17 4406·01117-00
Nut, 6-32 Hex
18 C-11627-R
Flipper Base Assembly, R.
19 06-14G
Insulating Blade
20 4105-01019-10
Sh. Metal Screw, #5 x
5/8
21 4701-00002-00
Lockwasher, #6 split
22 23-6622
Tape, DOUble-sided
23 03-7811
End of Stroke (EOS) Switch
•• - Also see separate diagram
Left Flipper
pIn
C-11626-L-3
(Parts listed replace same Items of C-11626-R-3)
Item Part No.
Description
13 B-l0655-L
Crank Link Assembly, Left
g)
B-10657-L
Flipper Crank Assembly, Left
1.) 01·8073-L
Flipper Crank, Left
18 C-11627-L
Flipper Base Assy, Left
LOWER. RIGHT FLIPPER
Flipper Assembly
Notes:
1 Each Flipper Assembly on the Lower Playfleld Is
mounted beneath the playfleld. In conjunction with the
plasllc Flipper Paddle and Shalt
(20-9250-5)
and
flipper Rubber
(23-6519-4)
on the upper side 01 the
playlleld.
2 The tip 01 the EOS Switch mUlt tnsvel
0.0150 (+ .010,
- .000)
Inch, before the contacts. lully open. with the
flipper In the actuated pa,IUOn:··· The EOS Switch
contacts mUlt have a gap. of
0.062
(t
.015)
Inch.
Adjustment of the EOS Switch must be made at a
minimum distance of
0.25
Inch from the switch body.
3 All moving elements of the assembly must operate
freely, with no evidence of binding.
4 The large end 01 the Coli Plunger Spring (Item
12)
must
fit within the lour lugl 01 the Solenoid Bnscket.
5 For coli replacement, remove the Solenoid Bracket
(Item
11)
to prevent screw damage.
B Use Loctlte""
242
when reallachlng screws to the
Flipper Stop Assembly, the Solenoid Bracket, and the
Flipper Bushing.
7 When reptaclng the Bumper Plug (Item
14)
to restore
proper flipper operation, readjust the flipper peddle and
shalt position.
8 Solid color blue wire connects to the bandedend of each
diode, mounted on the connector end of the Flipper Coli
(Item 9). Trace color wire connects to the unbanded
end of the diode.
LOWER. LEFT FLIPPER
Flippers
2-13