Basic HTML Version
• UPDATINGTHEGAMEPROGRAM
Using a Pub card
1. Turn off the game.
2. Remove the marquee.
3. Pull the computer case forward and let it hang down in front of the monhor.
4. Open the computer case.
5. Plug the card into the ISA socket. (See diagram below.)
6. Tum the game on. The updated program downloads automatically.
This takes a few
minutes.
7. When the process is complete, tum the game off and remove the card.
8. Close the computer case and slide it back in the backbox.
9. Replace the marquee.
10. Turn the game on. It is ready to play with the updated program installed.
Using a laptop computer
You need a serial 'null modem' cable, Internet access and of course a laptop computer.
1. Go to web she www.DinbaII.CQm,then click on Technical Support. From Technical Support,
click on Pinball 2000 Support, then scroll down to and click on Updating Pinball 2000 (under
technical bulletins and tutorial). Read all of Updating Pinball 2000 BEFORE going any
further.
2. Download the Update Manager to your laptop.
3. Download the game software update to your laptop.
4. Install the Update Manager. You will locate it in Windows Explorer. Once it is installed, a
shortcut icon will appear on the desktop.
5. Connect your laptop to the game. Use the 'null modem' cable and connect the serial port of
the laptop to the serial port of the game. The game's serial port is located just inside the coin
door on the same bracket as the interlock switch.
6. Run the update manager as shown in the tutorial. It takes about ten minutes to download the
updated program into the game.
7. Once the download is complete, disconnect the cables, turn the game off and back on. You
are ready to play.
1-43