Basic HTML Version
Flipper Assembly
A-15849-R-2
(Lower & Upper Right Flipper)
A-15849-l-2
(Shown)
(Lower Left Flipper)
-,'
-'
"
;'
.•..
" I
~
•
Flipper Notes:
J.
Each Flipper Assembly is mounied beneam the playfielti. in conjuction with the Plastic Flipper
&
Shaft. and Flipper Rubber
on the upper side of the playfield.
2. With the flipper, in the non-activated position. the E.O.s. Switch contacts must have a gap of .062 (±.015) inch. When
flipper is activated switch must close.
3. Any adjustment of the E.O.S. Switch must be made at a minimum distance of 0.25 inch from the switch body.
4. Longer blade of E.O.S. Switch must be straight. Gap adjustment is done by adjusting shorter
blade.
5. Ail moving elements of the assembly must operate freely wahoui any evidence of
binding,
6. Apply Loctue
1M
245
when reaiaching screws to the Flipper Stop Assembly. the Solenoid Bracket. and the Flipper
Bushing,
.s,ilil iilEA
1HE IIEXT 6EIIEIIiITIIIR 2-17