Basic HTML Version
GAME ADJUSTMENT PROCEDURE
(Continued)
66 Install Extra Hard
The operator can change the game play difficulty adjustments to a combination that is much more difficult
than the Factory Settings. Individual Adjustments are affected, as follows:
Ad
~
~ew Setting
ill!
Ns!lli!
N!ilw Setti!Jg
31 Freeway Start
25,000
38 Kickbak Memory
Harder
32 Freeway Memory
Hard
39 Light Freeway
Hard
33 Ej. Hole Spots
No
40 Rmp. Bon. Memory No
34 Ramp Spots
Yes
41 Ex. Ball Memory
Yes
35 Light Special
Hard
42 Stplite Targets
Regular
36 Special Memory
No
43 Freeway Timer
Hard
67 Auto Burn-in
The operator can choose the YES option for this Special Preset Adjustment to perform certain automatic
testing of the game, as used in the factory. It does not affect the game operation, but merely provides for
a cyclic testing of most of the game's mechanisms.
68 Clear Coins
The operator can request the clearing of the coinage audits (Au 01 through 04) by selecting (via the Credit
button) the YES option, as shown in the SPEEDER 4 display. This adjustment zeroes the counters tallying
the number of coins through each slot, the Paid Credits counter, and the Credits display.
After the YES option is displayed, the operator must press the ADVANCE button. The game then displays
COINS CLEARED.
69 Clear Audits
The operator can request the clearing of the non-coinage audits (Au 05 through 38) by selecting (via the
Credit button) the YES option, as shown in the SPEEDER 4 display. This Adjustment zeroes the counters
tallying the remaining Audit factors. Please note that this does NOT affect the Automatic Replay Percen-
taging data nor the automatic High Score Reset counter.
After the YES option is displayed, the operator must press the ADVANCE button. The game then displays
AUDITS CLEARED.
70 Install Factory
The operator can request the game to provide the normal Factory Settings to restore the game to its
'factory condition'.
This Adjustment clears all Audits, resets all Game Adjustments to the respective
Factory Settings, and provides a restart of the Auto Replay (Ad 01).
After the YES option is displayed, the operator must press the ADVANCE button. The game then displays
FACTORY SETTING.
Closing of the coin door before appearance of the FACTORY SETTING message or a problem in the
Memory Protect circuit will cause the game to display ADJUST FAILURE.
A loss of battery power or improper treatment of the Game Adjustments will cause the game to attempt to
restore Factory Settings.
The game announces the results of this reset process with the appropriate
message, FACTORY SETTING or ADJUST FAILURE.