Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: sirlonzelot on February 12, 2017, 04:00:15 PM

Title: HELP !! Smoke came up and after that some coils dont work
Post by: sirlonzelot on February 12, 2017, 04:00:15 PM

Hi

During gameplay i notice some smoke coming up from the underside of the playfield.
After that i notice that some coils dont work

Here they are

01 auto plunger
02 trough eject
10 left slingshot
11 right slingshot

Is there anything i can chevk / do ?

Thanks

Greetings

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: sirlonzelot on February 12, 2017, 04:25:00 PM

Update: i notice that fuse f1 from the solenoid board was Blown I replace that with a 4ampere fuse and after that no coil is working any more.
The 50v on the driver boards are missing :(

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: Lloyd Olson on February 12, 2017, 06:23:49 PM

I believe you have a ticket on this I've responded to.

Hopefully you can sort it out a little and then I'll kick it to CGC to get you what you need.

LTG : )

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: sirlonzelot on February 13, 2017, 03:13:53 AM

Yes, right. Again thanks for your quick help. I will do the test later...

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: sirlonzelot on February 14, 2017, 12:56:52 PM

I found it, it was a bad coil (auto fire)

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: Lloyd Olson on February 14, 2017, 01:26:50 PM

Please add it to your ticket, if you haven't yet.

Thank you,
LTG : )

Title: Re: HELP !! Smoke came up and after that some coils dont work
Post by: sirlonzelot on February 14, 2017, 02:09:07 PM

Already done. I am very pleased with the support 👍🏻